Month: October 2019

It’s virtually not possible for online shopping merchants to work without having enabled as payment type the credit or debit cards. Before you can accept “plastic,” you have to use a payment service provider who acts as a link between you, banks, and credit card networks. Lots of financial service providers do business exclusively with low-risk businesses, who they consider as a safer investment. That means businesses considered high-risk will have a limited selection of potential processors to choose from. Any processor you approach will take a careful, detailed look at your business to determine if you fall under their definition of “high risk,” based on the financial risk your company represents.

Some providers will not allow/support to integrate with the method where you can use own payment page and the clients stay on your website. They may allow only the use of their hosted payment page, meaning your clients are redirected from your website to their secure payment form and then back to your »Thank You« page. If you don’t prefer that, we strongly advise that you ask your provider if Direct API integration is supported, before you invest your time and money into the application process. Choosing the best merchant account provider: Like anything else, you’ll need to do a lot of research before you choose your new merchant account home. You don’t want to choose the first provider and not the cheapest either. Doing your due dilligence and asking all above questions will save you from trouble afterwards and make sure the solution will fit with your business.

Active under various names since 1997, High Risk Pay is specifically focused on serving high risk merchants. The company offers point-of-sale equipment, ACH processing, and chargeback prevention to all of its merchants. High Risk Pay can process payments for e-commerce, travel, e-cigarette, startup, bad credit, international, high volume, and adult merchants.

List of high risk merchant processors in 2019. This is a hot topic as more countries open up to new products. High-risk merchant accounts are a subset of financial services that allow businesses to accept card payments from clients. Credit card processors assign merchants to one of two categories: high risk or low (normal) risk, based on a number of factors. High-risk merchants face reduced choices in processors, plus raised fees and stricter contracts. Being considered as high-risk sounds terrible. But in some scenarios, it can be your only option. We have been talking about multiple properties of the high-risk merchant account business for years and have probably touched on most, if not all, of the most decisive issues. Here are some more advices on high risk merchant accounts. See extra details at Free high risk merchant account.

Global Merchant Advisors delivers customized processing solutions that allow merchants to focus on growth rather than payments. GMA advisors are available to guide merchants every step of the process. We did transactions on all of the high risk credit card processors, to be able to compare and a solid pick is iPayTotal. They cover all business types, have a huge experience in the field, fast customer support and low fees.

Costs associated with maintaining a merchant account include both processing rates and account fees. Processing rates are assessed on a per-transaction basis, while account fees are billed monthly or annually. Ordinarily, we recommend an interchange-plus pricing plan for processing rates over a usually more expensive tiered pricing plan. As a high-risk merchant, however, you will have a harder time getting approved for interchange-plus pricing. It’s still worth asking for during the negotiation process, though. Likewise, you can also expect to pay higher fees than a non-high-risk merchant would.

Our goal is to have your account approved as soon as possible with the best rates. Typically within 5-8 days, your account is ready. Integrate your website with a selected payment gateway or use a Virtual Terminal to accept credit card payments. Tailor-made package includes an arrangement of a merchant account (MID) with one of our EU/UK or international acquiring banking partners, with an award-winning payment gateway service, reporting tools, integrated fraud-prevention, and free dedicated lifetime support. We bring transparency and standards to the high-risk payment processing industry, providing businesses with the most competitive deals in high-risk merchant accounts suited to their needs – not just for now, but long-term.

IPAYTOTAL LTD
Company Address: 60 Windsor Avenue London, England SW19 2RR
Company Website: https://ipaytotal.com/.
Support Email: support@ipaytotal.com
UK Tel:+44 800 776 5988
US Tel:+1 845 215 4017
Company # 11357725

Soldering produces a narrow but expanding directional rising plume of fume with a high concentration gradient making it a high strength source. The plume of fumes is highly variable and prone to disturbance by ambient air movements. Uncontrolled soldering causes high personal exposures in the breathing zone; this can be 20 – 50 times the S.T.E.L dependant on the soldering scenario. This can equate to exposures exceeding the 8-hour TWA W.E.L after only 15 minutes of soldering. General ventilation at 5 air changes per hour (ach) per hour was not sufficient to control personal exposures, but was capable of reducing background exposures within the test room.

The Health and Safety Executive (HSE) are the government body responsible for the regulation and enforcement of work related risks to people in the work place. Dust & fume exposure is a key element of the COSHH 2002 (Control of Substances Hazard to Health) regulations setting out exposure limits, preventative guidelines and on going reductions of the contact between people and hazardous gas and particulates. Under COSHH, companies must take steps to prevent, control, maintain and monitor dust and fume exposure in the workplace, as laid out in regulation 9.

According to the HSE, around 13,000 workers in the UK die each year from historic work-related exposure to airborne contaminants at work leading to lung disease and various cancers. These figures are estimated to be attributed to past exposure, primarily to chemical and dust at work.

All Companies and Employers using extraction equipment have legal requirements they must undertake. All equipment must be examined and tested in order to comply with Regulation 9 of the COSHH Regulations. The Employer must make sure that equipment is maintained and in efficient working order and of good repair. A thorough test should be undertaken once every 14 months and in some cases far more frequently. It is also a requirement of the employer to keep a suitable record of the test. All for a period of at least 5 years. This record should also include details of repairs carried out as a result of the test. See more info on https://www.weldingsuppliesdirect.co.uk/welding-equipment/lev-testing.html.

Where employers use or intend to use LEV they must ensure that it is appropriate for the task, installed and operated correctly and subsequently maintained so it continues to operate as when originally installed. Suppliers of LEV can play an important role in helping the employer with the design, installation and maintenance of the equipment. This guidance is therefore intended to help employers and suppliers as well as managers, trade union and employee safety representatives to work together to provide effective LEV so that workers are not breathing in hazardous substances. Different chapters will be more appropriate for different audiences.

You also have responsibilities for your own health and safety at work. You can refuse to do something that isn’t safe without being threatened with disciplinary action. If you think your employer isn’t meeting their responsibilities, talk to them first. Your safety representative or a trade union official may be able to help you with this. As a last resort, you may need to report your employer to the Health and Safety Executive for Northern Ireland or to the environmental health department of your local authority.

A carbon monoxide detector, which can be purchased for around £20, can alert you to the presence of carbon monoxide in your home. You should ideally place one in every room where gas is being burned-for example, in the kitchen near a gas hob or beside a boiler. Opt for an audible detector, which works much like a smoke detector, alerting you via a loud noise. Be sure to test the detector regularly and replace the batteries as needed.

Section 2 of the Health and Safety at Work Act 1974 states that an employer or self-employed person has a responsibility to provide and maintain plant and systems of work that are, so far as reasonably practical, safe and without risk to health. Statutory Instrument 1998 No. 2306: The Provision and Use of Work Equipment Regulations 1998 requires that the user of an installed gas system and the owner of a mobile gas system shall ensure that the system is properly maintained in good repair to prevent danger. See more info at https://www.weldingsuppliesdirect.co.uk/welding-equipment/cp7-cp47-gas-equipment-safety-inspections.html.

Keep ventilation clear and unblocked. Ventilation for gas appliances can include chimney flues and air vents and bricks. Black soot marks appearing on an appliance can be a sign that the ventilation is blocked. Properly fit a carbon monoxide detector: Carbon monoxide is a highly dangerous colourless and odourless gas, making it difficult to detect until it’s too late without a carbon monoxide detector. All homes containing gas appliances should have a detector, which can be bought from most DIY stores and are readily available to buy online. When choosing an alarm, make sure that it meets European safety standards.